HotBlanket PVC Benders (BB5150, BB2030, BB3040).

Hot Blanket PVC Benders only have a 90 warranty!!! If these are used improperly, such as the end of the PVC not being properly supported at the ends and the blanket is resting on the concrete while making a bend this WILL burn a hold in the side of the blanket and this is not covered under warranty. Also, after each bend, this bender should be given 10 minutes to cool. This is NOT a unit designed for consistent production bends.
This tool is NOT repairable, do not attempt to modify this product!

Advertisements

I have a Fiberline Fiberglass fish tape, but it is not the same as the one in the catalog. Do you have a replacement kit for the older ones?

The current Fiberline tape is the FTF-200 which is 3/16” in diameter. We also had another size tape that was 1/8’ in diameter. We do have the kit for the FTF-200 (FTRK-20) but no longer have replacement tip kits for the 1/8” fiberglass Fiberline tapes. The FTRK-200 will not work with the smaller diameter kits.