We have manuals for many of the meters that are no longer manufactured by us. If you don’t see the manual that your looking for on our website than please email us at the below address with the meters model number in the subject line. If you don’t have a model number than please attach a picture of the unit so that we can try to identify it.
If you see a manual and the link doesn’t work please email us by using the link below.
Today, with many people looking to do simple wiring jobs at home on thier own, outlet and GFCI testers are becoming more and more common tools in the home owner’s tool box. That being said, many people purchase the tester to inspect outlets or check the work they have done, but they are not 100% sure as to what the tester is telling them.
Below is a picture of the wiring of a standard wall receptacle that you would most likely find in your home. As you see, there are three different wires that should be connected to your receptacle. There should be a black, a white, and a green wire attached securely to each receptacle.
Each of these wires has a different purpose, and are vital to ensure that your appliances that are plugged in are properly powered and grounded, as well as providing you with safe connections for these appliances so that you do not recieve an electrical shock.
Black(Hot)- This is the wire that is carrying the voltage to your appliance. This is commonly referred to as the “Hot” wire because it is the wire that is carrying the voltage.
White(Neutral)- This wire is the wire that allows the voltage to return to your panel.
Green(Ground)- This wire is a safe return for voltage if the neutral doesn’t properly function. This wire allows the voltage and current to return to ground without shocking the user.
The Cam-10 is the circuit alert unit that detects electricity for all of our Circuit Alert tools. This sensor takes two LR44 button style batteries. For a detailed instructional video on the battery installation for the Circuit Alert (CAM-10) unit attached to your tool, please follow this: LINK!
There are a few different tools that we offer for tracing wire/cable in the home or for commercial applications. Regardless of the type of cable all of our units are capable of tracing cable. Each unit has what is called a “tone generator” or a transmitter that sends a tone over the cable that can be picked up by the receiver or “wand”. Below are some of the tools we have that cover this, all of which can be used in either commercial or at home applications.
GET-4220K Lan Tracker
ET64220 Lan Tracker
Normally when you see this, the first thing that you will want to check is all of the connections on the back of the receptacle, and if all of those are tight, then check the rest of the receptacles in the circuit.
– Many times when you see this, there is a loose neutral connection on the receptacle.
– You will also want to make sure that you do not have any other appliances or electronic devices plugged in on the circuit. Sometimes components inside of these products can create feedback or leakage to another wire that will give these types of testers problems.
– Plugging into a 12V DC to 120V AC converter will also have this issue.
If none of these steps resolve the issue, then we recommend that a licensed professional examine the situation for you.
To install the batteries in this tester, you will need to remove the battery cover, which is located at the rear of the unit. The cover is the strain relief that connects the wire test lead to the body of the unit. You will need to twist the cover to remove it.